NSS Limited Industrial Equipment Safety Evaluation,Consulting, Safety Evaluation, Technical Manuals,Hazard Warning Labels, SEMI,NRTL, CE,

Hazard Warning Labels

You will be able to download the order form by clicking the button shown on the right.
Please print out the PDF file and FAX it to us to make purchase order.

• 1|
• 2|
• 3

Toxic/Corrosive Vapor Hazard NCW-01-003

This label is affixed to enclosure doors and panels where a risk of chemical burn exists due to inhalation of toxic or corrosive chemical vapors

Label word messages:
- TOXIC OR CORROSIVE VAPOR PRESENT (Hazard Identification)
- Inhalation may cause chemical burn. (Hazard Consequence)
- Wear proper protection equipment before servicing. (Hazard Avoidance)

This label must be attached on a single unit of component only.

Label word messages:
- RISK OF ELECTRIC SHOCK (Hazard Identification)
- Do not open outer covers. (Hazard Avoidance)
- No user serviceable parts inside. (Hazard Consequence)

This label must be attached on the unit to ensure that it is certified and conformed for CE Marking Label

This label is affixed to any enclosure or door that provides access to electrical components operating at hazardous live voltage levels that can result in severe injury or death due to contact with these electrical components

This label is affixed to any enclosure or door that provides access to electrical components operating at hazardous live voltage levels that can result in severe injury or death due to contact with these electrical components.

This label is affixed to connection points for protective grounding conductors other than the main protective grounding conductor (PE).

This label is affixed in the immediate vicinity of the MAIN protective grounding conductor(s) supplied by the facility.

This label is affixed to any grounding location that is used for equipotential bonding purposes.

This label is affixed to enclosure doors and panels preventing access to laser radiation produced within the system. Service personnel are instructed to wear proper eye protection to avoid exposure to the hazardous laser radiation.

Label word messages:
- LASER RADIATION (Hazard Identification)
- Exposure to laser radiation. (Hazard Consequence)
- Wear laser safety glasses when servicing. (Hazard Avoidance)

Multiple Electrical Sources Hazard NEDPET-13-013

This label is affixed to electrical enclosure panels that contain multiple electrical supply sources into the same enclosure. Personnel are alerted to the presence of the multiple electrical supply sources and instructed to disconnect all power sources prior to servicing.

Label word messages:
- RISK OF ELECTRIC SHOCK (Hazard Identification)
- More than one source of power is supplied to the equipment.
(Hazard Consequence)
- Disconnect (LOTO) all sources of power prior to servicing.
(Hazard Avoidance)

During heavy duty operation, if there is a risk of injury, please attach this label on the machine.

Label word messages:
- Heavy Object (Hazard Identification)
- Heavy object lifting may cause severe injury. (Hazard Consequence)
- Lift with two or more persons, or use a jig to remove or replace. (Hazard Avoidance)

This label should be attached on the machine when toxic or corrosive liquid leaks inside the system.

Label word messages:
- TOXIC OR CORROSIVE VAPOR PRESENT (Hazard Identification)
- Inhalation may cause chemical burn. (Hazard Consequence)
- Wear proper protection equipment before servicing. (Hazard Avoidance)

Thermal Hazard NMWPET-08-007

Label must be attached on the access door or panel if the unit has heater unit installed.

Label word messages:
- HOT SURFACE (Hazard Identification)
- May cause severe burns. (Hazard Consequence)
- Turn power off and wait for internal parts to cool down before servicing. (Hazard Avoidance)

This label is affixed to electrical enclosure doors and panels where there is a risk of electrical shock or burn due to contact with hazardous voltage.

Label word messages:
- HAZARDOUS VOLTAGE (Hazard Identification)
- Contact may cause electric shock or burn. (Hazard Consequence)
- Turn off power and lockout system before servicing.
(Hazard Avoidance)

This label is affixed to enclosure doors and panels where a risk of severe chemical burn exists due to exposure to hazardous chemicals.

Label word messages:
- CORROSIVE CHEMICALS (Hazard Identification)
- Contact may cause chemical burn. (Hazard Consequence)
- Wear proper protection equipment before servicing.
(Hazard Avoidance)

This label is affixed to enclosure doors and panels behind which flammable chemicals are used or stored. Service personnel are therefore warned not to introduce sources of ignition into the service area to avoid fire damage to the equipment and facility.

Label word messages:
-FLAMMABELE CHEMICAL (Hazard Identification)
- Fire may cuase severe damage to the facility, equipment and personnel. (Hazard Consequence)
- Remove all sources of ignition before servicing. (Hazard Avoidance)

This label is affixed to enclosure doors and panels behind which exists components producing magnetic fields capable of impairing the proper function of pacemakers.

Label word messages:
- STRONG MAGNETIC FIELD (Hazard Identification)
- Pacemaker may malfunction. (Hazard Consequence)
- Pacemaker wearers must stay away. (Hazard Avoidance)

Mechanical Pinch Hazard NMWPET-08-008

This label is affixed to enclosure doors and panels where there is a risk of coming into contact with moving parts representing a potential pinch hazard.

Label word messages:
- PINCH POINT (Hazard Identification)
- May pinch hands or fingers in moving parts. (Hazard Consequence)
- Pacemaker wearers must stay away. (Hazard Avoidance)

Ultraviolet Radiation Hazard NUWPET-12-004

This label is affixed to enclosure doors and panels
where there is a risk of exposure to hazardous UV radiation.

Label word messages:
-ULTRAVIOLET RADIATION (Hazard Identification)
-Exposure to Ultraviolet radiation (Hazard Consequence)
-Wear Ultraviolet safety glasses when servicing. (Hazard Avoidance)

• 1|
• 2|
• 3

TOP PAGE